Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 1
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 2
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 3
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 4
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 5
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 6
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 7
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 8
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 9
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 10
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 11
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 12
Fiber Fusion Splice Protection Sleeves Smurfs - 100 Pack - Image 13

Fiber Fusion Splice Protection Sleeves Smurfs – 100 Pack

R35.72 – R147.20 inc VAT

Data Sheet

.

SKU: SES00082

Description

These fiber splice protection sleeves are used for installations and repairs when splicing two fiber strands together with a splice machine.  They are considered a consumable.

Once a splice has been done with a fusion splicer the fiber optic joint needs protection, the splice protection sleeve is slid over the joint after the splice. Then it is placed in a heating element on the fusion splicer that will allow the heatshrink material to bond to the fiber strands and protect the joint. A steel strength wire is also incorporated into the splice protection sleeve to ensure that you can not bend the join and cause a breakage .  These sleeves are made of the best quality heat shrink material and steel strengthening wire.

The heat shrink material is a polyolefin heat-shrinkable tube.

Often the enclosure that will house the splice joint has specific holders to securely keep each joint in order and organised.

Pack Quantity – 100 sleeves

 

Features

• Protect fusion point, it is most reliable way to protect strands of fiber.
• Easy to use with fusion splicer
• Transparent tube, so you can easily see the status of fiber strands and fusion point
• Minimum shrink temperature:120°C, sleeve can shrink very quickly and harden.
• Works in temperatures -55°C~100°C
• Sealing ends of tube to let the closure have a good resistance to temperature, water and humidity fluctuations

Specifications:

Sleeve Lengths     40mm   |   45mm   |   45mm   |   45mm    |   60mm
Sleeve Diameter (Pre Shink)      3mm    |     3mm    |   2.5mm  |  1.3mm    |    3mm
Sleeve Diameter (Post Shink)     2.5mm  |    2.5mm  |   2mm    |   1.2mm   |   2.5mm
Inner Tube Diameter      1.5mm  |    1.5mm   |  1.3mm   |   1.5mm   |   1.5mm
Steel Needle Diameter      1mm    |      1mm    |     1mm    |    1mm     |     1mm
Shrink Temprature                                             120°C
Operating Temprature                                       -55 to 100°C
Tensile Strength                                           18MPa
Elongation at Break                                             700%
Density                                          0.94g/m³
Tensile Strength                                           18MPa
Dielectric Strength                                       25kV/mm
Dielectric Constant                                              2.5
Longitudinal Change                                             ±5%
Eccentricity                                             105
Volume resistance                                            1015Ω

Additional information

Weight N/A
Dimensions N/A
Sleeve length

60mm (3mm), 45mm (2mm), 40mm (3mm), 45mm (3mm), 45mm (1.3m)